大数据时代计算机软件技术的应用

随着时代的发展,信息技术在各个领域均得到广泛运用,计算机软件技术也越发凸显出其重要性。大数据时代为人们的生活带来了便利,使日常工作变得更加高效。文章从大数据时代下计算机软件技术的内涵着手,提出了计算机软件处理数据的技术手段及应用方向,对计算机软件的相关应用展开论述。     

基于PLC的胶带输送机保护系统研究

为了解决煤矿胶带输送机胶带在运行过程中出现的纵向撕裂的问题,采用PLC控制系统,研究了胶带输送机保护系统,分析了PLC系统特点,对系统的硬件部分的技术参数和设计要求进行了设计,对监测系统PLC进行了选型,采用S7-200 CPU226CN控制器,分析了语言报警系统,然后对PLC控制系统软件进行了设计。研究对促进我国胶带输送机保护技术的发展具有重要的意义。     

塑料盖注塑成型方案分析及翘曲变形参数优化

以塑料盖作为研究对象,获得最优成型方案,预测塑件成型后的翘曲变形程度以提高塑件质量。初步提出两种注塑工艺方案加工塑料盖,使用Moldflow软件对两种方案注塑过程进行模拟对比分析,对产生翘曲缺陷的原因进行研究;利用五因素四水平的正交试验,以减小翘曲变形程度作为优化目标,优化工艺参数。模拟结果表明:方案二为最优方案,且翘曲变形主要是由收缩不均匀以及取向不均匀而造成的,翘曲变形程度最小的工艺参数组合为熔体温度250℃、模具温度60℃、保压时间12 s、冷却时间12 s、填充时间0.9 s,优化后比优化前翘曲变形程度降低9.4%左右,熔料熔接和材料性能也有所改善,塑料盖整体质量提高。实验可有效地缩短塑料盖的研发周期,降低生产成本,提高塑料盖的研发成功率。     

Metallization and Ar‐O plasma effects on dental enamel roughness evaluated with SEM and MeX™ for 3D reconstruction

The MeX? software is a useful tool for tridimensional data collection for surface evaluation and could be relevant to evaluate the same specimen in different phases of the study, assuming repeated measures of dental enamel roughness. The aim of this study was to evaluate the influence of sample metallization for dental enamel roughness analysis with 3D images reconstructed using MeX? software from Scanning Electron Microscopy (SEM) images. The influence of 74.98% (%mol/mol) argon?oxygen plasma for carbon layer removal on surface roughness of the metallized specimen was also evaluated. Dental enamel specimens were prepared for SEM analysis with and without carbon metallization using conventional or environmental modes. Argon?oxygen plasma for carbon layer removal was used and surface roughness was re‐evaluated. Roughness obtained by SEM and MeX? reconstructed images, with or without metallization, did not differ. No significant alteration on surface roughness after carbon layer removal using plasma was found. SEM baseline evaluation using conventional mode without sample preparation and in environmental mode were not comparable. Roughness of enamel 3D images reconstructed with MeX? software from SEM images, with or without metallization was similar. The 74.98% (%mol/mol) argon?oxygen plasma removed the carbon layer with no effect on enamel roughness.     

一种射频抗电磁干扰的矿用红外温度传感器

设计了一种适用于复杂条件下实施井下温度探测的射频式红外温度传感器。借助于光学系统、光电探测器实时感应井下温度并提取温度信号,同时在DC-DC电源隔离模块中实施EMI滤波以抗电磁干扰,处理后的信号经过A/D转换、运算器放大后显示在LCD上,实施读取数据并记录在传感器的存储片上,实现了矿井复合灾害条件下的温度测试,测试精度控制在±2%。     

地下深部铜矿排水自动化系统研究与实践

本文针对国内地下深部铜矿矿山已建成的井下排水自动化控制系统中存在的问题,以铜矿井下排水自动化系统设计和建设为背景,介绍了排水自动化系统的功能要求、控制关键、实现方式、联动智能分析,该系统以电动阀门改造、Wincc软件等为建设平台,结合水仓水位、主管道压力和流量、阀门开度智能感知等数据,采用地下深部多级联动排水智能调控,远程自动对离心泵、电动闸阀等控制,实现了排水系统远程智能控制。     

Optimization of sugar release from banana peel powder waste (BPPW) using box-behnken design (BBD): BPPW to biohydrogen conversion

Optimization of pre-treatment conditions has been achieved for total sugar release from banana peel powder waste (BPPW) feedstock modelled through a three-level Box-Behnken design (BBD) of the response surface methodology (RSM). A series of various runs were executed at varied acid (H₂SO₄) concentrations (0.05%–0.15% v/v), incubation periods (1 h–3 h) in water bath at 95 °C and alkali (NaOH) concentrations (0.05%–0.15% v/v) according to the Box-Behnken design (BBD). From RSM the significant values of incubation period, acid concentration and alkali concentration were obtained as 3 h, 0.095% v/v, and 0.05% v/v respectively. The maximum total sugar release was reported as 5243.62 μg/ml which was highly close to the predicted value (5010.07 μg/ml). The model P- value (0.001), R-sq (98.26%), (adj) R-sq (95.14%) and (pred) R-sq (79.56%) obtained through ANOVA justified the results. The mutual impact of alkali and incubation period had the highest effect on total sugar release from dried banana peel powder, followed by mutual impact of acid and incubation period based on ANOVA (Analysis of Variance) results.Under optimized conditions of pre-treatment six different substrate concentrations (1%, 3%, 5%, 7% and 9% w/v) of BPPW was hydrolyzed and used to obtain volumetric bio-hydrogen evolution. The highest cumulative volumetric bio hydrogen gas 43 ml H₂/30 ml media was achieved at 5% w/v of pretreated BPPW. The substrate concentration above 5% w/v resulted in lowered fermentation process owing to product and substrate inhibition.     

Telesurgery QoS improvement over SDN based on a Type‐2 fuzzy system and enhanced cuckoo optimization algorithm

Telemedicine is a new area based on the information and communication technology for collecting, storing, organizing, retrieving and exchanging medical information. One of the most important applications of telemedicine is indeed telesurgery in which an efficient telecommunication infrastructure between the surgery room and remote surgeons need to be established. One of the most important issues to be tackled in telesurgery is to find favorable links for routing as well as providing high Quality of Service (QoS). In this paper, an efficient model based on the hybridization of Type‐2 Fuzzy System (T2FS) and Cuckoo Optimization Algorithm (COA) over the Software Defined Networks (SDN) is proposed in order to achieve optimal and reliable routes for telesurgery application. Using T2FS, the fitness of the links is determined; then, a COA is conducted over the Constraint Shortest Path (CSP) problem to find the best routes. Delay is considered as a CSP problem which is satisfied by trying to find the paths with minimum cost. Due to the NP‐completeness of the CSP problem, an Enhanced COA (so‐called E‐COA) is proposed and utilized as a metaheuristic solver. To the best of our knowledge, this paper is the first SDN‐based communication model that applies both T2FS and E‐COA for assigning proper costs to the network's links, and solves the consequence CSP problem according to the QoS requirement for telesurgery. The model also recognizes and preserves the second‐best routes in order to keep the reliability for such a critical application. In addition to the simulations, the performance evaluation is also conducted on a real experimental scenario. Many comparisons are carried out between the proposed model and other conventional methods, and the evaluation study shows the superiority of the proposed model on all the three QoS‐related metrics, i.e. average end‐to‐end delay, packet loss ratio and PSNR.     

Recovery of Collided RFID Tags With Frequency Drift on Physical Layer

In a passive ultra-high frequency (UHF) radio frequency identification (RFID) system, the recovery of collided tag signals on a physical layer can enhance identification efficiency. However, frequency drift is very common in UHF RFID systems, and will have an influence on the recovery on the physical layer. To address the problem of recovery with the frequency drift, this paper adopts a radial basis function (RBF) network to separate the collision signals, and decode the signals via FM0 to recovery collided RFID tags. Numerical results show that the method in this paper has better performance of symbol error rate (SER) and separation efficiency compared to conventional methods when frequency drift occurs.